Showing posts with label thrift. Show all posts
Showing posts with label thrift. Show all posts

Sunday, October 25, 2026

Bring on the Junk Wagon

Farm Wagon behind a UTV

Every farm needs one: a junk trailer that you'd never run on a road, made from the bed of some long-lost pickup truck.

 I wish I had the vintage truck that gave birth to our trailer. From debris, including a completely rusted-out tailgate in the woods, I am guessing it was a 1950s International Harvester truck. The trailer lived part of its life in Buckingham County, where my late father-in-law took it to haul brush away as he cleared out around his old family "Home Place" we restored between 2001 and 2012. Those brush piles dwarfed the ones I made this weekend, cleaning up our garden. This year's pile? The size of an 8' x 10' shed.

 Puny by country standards. It will breed rabbits and keep the predators happy.

The old trailer finally gave up the ghost, or at least the Eisenhower-era air in the rock-hard tires. So I didn't use it for a while, as I hunted down ways to update the thing. I had modern rims from an old Buick I'm restoring. The problem? The original trailer had four wheel-lugs. Anything modern has five or more.

With some research, asking my brother-in-law, and YouTube videos, I found out how easy it can be to add a new hub to an old axle. Without getting too deep into the weeds, soon I'd mounted a new hub and the 15" hot-rod rims from the Buick.  

 I went to our local tire dealer, who always gets paid by me in cash (plus a fifth of his favorite bourbon at Christmas) to see if he had an old tires that were not road-worthy but in good shape. For the price of mounting them, I got two snow tires to put on the wagon. I had to cut off the flapping antique fenders but that was a small price to pay.

To make the hitch work with our UTV or farm tractors, I went to Tractor Supply and found a 1 5/8" trailer hitch and ball. With a drill applied to the shaft from trailer, I had it in place with two stout bolts. I cannot tell you how joyful it was to feel the trailer jolt as I pulled off in low gear, to get a bunch of cut grass that would soon be wind-rowed, dried, and stacked for next year's hay in a sunny place. 

"Make do or do without," my wife's dad said many times. He learned that in the Depression. He also said the farmer's mantra "I might have a use for that!'

We tossed the old tires and rims into our erosion-control area and buried them. The old fenders went to the transfer station's metal bin. The rest of the tractor? Working hard many days of the week. 

Farm Wagon from behind

 

If you farm, look for (or better yet, build) an old pickup-bed trailer. Town garden? Hunt the estate sales for a utility wagon. I saw one with a dump bed today at an estate sale. Just needed wheels and tires. 

Monday, September 28, 2026

"Call Some Guy!" It Depends

Braxton in a Maple

I've not posted since August because of other writing gigs and deadlines, as well as some much-needed DIY work. 

I've written here, a decade ago, about the fallacy of self-sufficiency; even Thoreau had his mom bring him pies. I love pie. That fact does not diminish Thoreau's genius at Walden.

Instead of rugged individualism, I side with self-reliance. Two recent projects demonstrated when you need a professional, as well as when professionals are feeding you a load of expensive hogwash.

When I Did It Myself

Outside AC unit DIY repair

Our HVAC firm, which I will not name, told us that our system at the rental property needed over $1500 in upgrades. Alternately, we might buy a new $20,000 system. Easy financing! This is how these firms suck in folks without DIY skills. This company used to be small, but as they got bigger and bigger, they appear to have become greedy and corporate.

The upgrades included $500 for a UV light to kill mold (which I could not find), new pipe insulation, and a $1000 fan motor on the outside unit. Mind you, the rental is owned by (thanks to my nephew Mike Ryan) "Uncle Cheapass." I told the HVAC firm "um, let me look into this" and found out that I could replace the fan motor for $90 myself. Amazon had a replacement to my door in a few days.

Wire harnesses, AC unit 

My philosophy on repairs is simple: if it is something that might kill me, I "call some guy." The AC unit could fry me like a fritter, but it's easy to turn off the current, so I did. And though I sheared off a cheap Chinese bolt-head while replacing the motor, my years of experience in breaking things paid off. In half an hour, including travel time, I had a threaded stainless-steel rod to replace the sheared bolt, from right down the street at Pleasants Hardware. Cost for the rod and a bunch of stainless fasteners? $10. I put the motor in, checking the wires from the old motor carefully before reconnecting anything. 

Guess what? the HVAC system ran like a champ when reconnected. $900 bucks saved. And the insulation the HVAC firm quoted me? I can do that for $10, instead of $150.

Uncle Cheapass!

When I Call Some Guy

My brother-in-law Joe and I have felled some huge trees. He's good at it and the earth shakes when the tree falls, right where Joe wants it.

A dying 60' Red Cedar, however, was another matter. it was on a steep slope between two farm buildings! It had been in decline for several years, when a Davey-Tree arborist told us to remove it before the fungal disease it carried infected our other huge cedars.

Joe needs cedar for making fence boards at his beach place, and he owns a saw mill. Despite that motivation, in his usual taciturn manner he said "gonna be tough" as he inspected the tree. I envisioned felling the tree onto a building, so I answered "I got a guy who does great work" and called Braxton that day.

Braxton has forestry training. I met him when helping a friend cut up a giant red oak. We chatted over a fence and I got his card. Since then he's done a few jobs for me. For the cedar, he gave us a tremendous estimate: $800 to fell the tree, plus trim up a Maple and fell 3 dead Hemlocks in our power lines. He can climb with a saw, something I would never do. 

The catch for most homeowners? I'd cut up the fallen trees, after Braxton got them into 8' logs. No worries for my big-dog Husqvarna saw, after nearly 30 years running a chainsaw. 

Braxton even got me a face cord of seasoned White Oak in exchange for an old boat trailer that he's going to convert to a log trailer for his firewood business. I think I found another Distributist Tractorpunk. 

Face Cord of White Oak
The brush on the ground? Joe owns a highway-department-grade wood chipper (let the Fargo jokes run wild, you betcha) that we'd use on limbs and other brush. He'd get the cedar logs. The Hemlock would go in the wood stove. 

I have heeded the lessons learned since 2012, when this adventure began. One can be self-reliant to a point. But when death might be the option? Call some guy!  

Know your limits, but when it comes to home repairs, be wary of big-company estimates. I was talking cars with a dude in Pleasants the other day. His brother owns a perfect Pontiac GTO (a Holy Grail for me). The guy owns a small HVAC firm. I'm in the market for a new, smaller firm to do our annual maintenance. I may not get a GTO out of the deal, but I may get some honesty about repairs.

 

Saturday, July 18, 2026

Weeds And My "Carboard Hack"

Carboard going down in garden path
One day a former neighbor came by to help with something. He said "I saw you out front weeding around your trees. I like your cardboard hack!" In short, I was putting broken-down boxes around our plantings and covering them with mulch.

Experienced gardeners know this trick, but if you don't, here are some pointers I learned. I did this because 1) I have a lot of Chewy boxes delivered 2) I'm a cheapskate and 3) It saves work.

Here are the basics:

  1. break down your large cardboard boxes and remove as much packing tape as possible. Don't fret if you miss some. It will come up to the top of the soil later and you can dispose of it.
  2. One layer of cardboard works great. If you have wind, weigh down the corners with old bricks or stones until you have the mulch on.
    Cardboard and staw in garden
  3. Spread your mulch of choice. For ornamental plants up front, that means pine-bark mulch. In the garden? Straw, hay we cut, even dried-out weeds that have not set seed.
  4. We go a few inches deep in mulch. Here's an area we covered up a bit late, after the weeds had gotten really tall.

Path in garden with straw

This system really cuts weeding in our humid, hot, and too often like this month, smoky summers. You can safely go in and weed around the cleared area. Copperheads often rest in tall grass and weeds near mating season (August in our part of the world). So bring a hoe to check the area first.

The cardboard will be saturated with the first rain and in time becomes permeable. It cools the soil under it and retains moisture. You can get clever and arrange the pieces to channel water into row-crops and other plantings. I just use it to give me paths that are weed-free, so I don't step on a Copperhead. Here's an ideal finished area.

Plantings with straw mulch

 In the cool months, or when the garden goes fallow, we let in the chickens. They demolish mulch and cardboard in a few days, eat any remaining bits of plants, and they hunt for bugs. I don't even have to clean up. Any leftover tiny cardboard scraps, save for stray packing tape, disappear after 8 months or so. 

You can find expensive and labor-intensive alternatives. Weed-block fabric works fine for a year, but we'll never use it again. Wire-grass and some other invasive weeds set their runners into the fabric, locking it in place. I had to use a reciprocating saw to cut it out. Black plastic is not permeable but it does block weeds. We have used it in a few spots and covered it with gravel. 

Cardboard does not have the problems outlined above. Give it a go, and save yourself a recycling trip in the process.

 

 


Saturday, July 11, 2026

And Just When It is Ready for the Scrap Heap...

Refrigerator Repair Image

I wrote earlier this year about how badly a GE refrigerator had behaved. We were on the cusp of buying a new Bosch refrigerator when, suddenly, the old unit stopped leaking water into the lower compartment.

It remains a mystery. There is a device called an evaporator coil that I'd considered replacing; it's an easy job for that appliance, within the reach of anyone with a screwdriver and some patience.  Perhaps--a big perhaps--the evaporator began to work normally again. 

Rather than throw $150 at the old icebox, we did throw $60 in its direction to replace the utterly cheap plastic holder for the two produce drawers. This supports a piece of tempered glass which serves as the machine's bottom shelf. It had cracked across in several places.

I love shopping locally, which is how I got the door gasket for the GE before; this too, may have fixed the problem. But when I called the out-of-state company that bought out our local parts provider, they quoted me a cost higher than GE would charge to sell me the shelf-holder directly. I told them this politely, and looked elsewhere, as I'd use two gallons of gas to pick the part up.

I was already looking at Amazon, where I got the OEM GE part cheaper still, with free delivery. It's in the refrigerator today.

We will use the money we saved to install another garage-door opener, as my wife can struggle with the large commercial doors we have on our building. We have one opener that we got fixed for free, and the company was ready to install another but the German supplier's parts have doubled because of the stupid tariffs from Washington.  We found a US-built option that is not as fancy, which is fine, but reported to be durable and comes with a warranty.

Anything but the planned obsolescence we see in modern appliances, particularly those built in the US or sold by US firms. The not-very-old GE hums on, meanwhile.

Image: Creative-Commons license, spares-direct-oldham.co.uk 

Saturday, June 20, 2026

Time for Aesthetics

Main Gate
 

We don't live by bread alone, and most people I know don't live to work, either, but some jobs make leisure more pleasant.
 

We began our farm adventure in late 2012, and we spent a large sum of money and quite a bit of time renovating the farmhouse to look and feel like us, while retaining the characteristics that made it charming as the childhood home of my wife. The next several years saw us put in a fenced garden, planting shade trees and ornamental plants between us and a busy road, keeping bees, raisng chickens, adopting and working with livestock dogs. We've been here long enough to bury two beloved dogs and two house cats. We opened new pasturage and began managing a field my in-laws own, across the street from us. We repainted the entire house once and most of the out-buildings while building an equipment run-in. We continue to rid our property of scrap metal and other useful salvage.

That's only part of 12+ years work, but finally, and after much learning, we began to make things pretty in the areas where visitors most often want to visit, our garden and hen-yard. Little children love this part of their trip to our end of the county.

The fences need maintaining every year, but after several years, the old home-made gates needed re-hanging. I found that the strap hinges typically used for attaching gates to posts begin with a good deal of "play" and slowly acquire more, until we and our farm-sitter struggle to open them.

 While I've gotten more skilled at building gates, I discovered that I'd overbuilt mine. When it came time to re-hang them, I was able to shed some of the supporting boards on the biggest gate, replacing them with corner braces. And new hinges that are made for posts got the gates to hang true for a few more years.

 Then, it got to be time to finally add visual interests to our garden, beyond the chickens themselves who patrol the paths and a few pieces of statuary.  I used a solid-color penetrating stain I've discussed here before to add a vibrant barn-red to our center gate. The gates to the dog-run got stained a bluish green that I used simply because I had a can and wanted to use it up.  Some inner gates are getting the barn-red treatment as well. Staining the wood appears to deter carpenter bees and makes the wood hold up longer, overall.

I do not buy into the old-timers' maxim that if you are not working until you exhaust yourself, you are "piddling," and that includes painting for lots of old guys. 

The spaces we inhabit should look good if we can afford the time and money to do so. Staining and re-hanging gates cost little money and time. The reward? At sunset,  you look at the garden and feel more inspired. An wooden picnic table will be next.

Dog Gate

Art museums always make me feel better about the human race. I can't fix our species but I can make my own corner of the world more pleasing to the eyes of all who stop by.

 Happy gardening this year. The corn is already knee-high! 

Tuesday, June 9, 2026

Recap on the Cheapness of Modern Appliances

Scrapyard with appliances

Well, here comes refrigerator #4 since we moved to the country in 2012. That's one reason I've not posted for the month of May. We had a dryer die, too, but that's not the issue here. That dryer was past peak at about age 15. A different dryer I bought in December for our rental property? When I registered the warranty, the woman at Whirlpool advised me that she'd just been to a seminar on their newest models.

"Expect three to five years, if you take good care of it."

This is American madness. If our would-be King had not gutted our Consumer-Protection Agency, dealing with this new planned obsolescence should have been high on their list of priorities.

When I took a half-ton of steel pulled out of our woods to the scrap yard recently, I saw about 100 new dryers, washers, dishwashers, and refrigerators thrown onto the scrap pile. When I asked around the answer I got was "damaged shipping container." Even if these new devices last a few years, give them to Habitat for Humanity. They still had dealer labels attached. Easier to write off the loss, I guess. To me that's immoral.

It was not always this wasteful. To be honest, the original Samsung did not fail (though the French doors were extraordinarily flimsy and I had to repair them a few times). A lightning strike took it out. The no-frills Maytag (oh, repairman of legend, where are you?) died all on its own. The freezer worked, though I had to repair the silly ice-maker, but then the cooler below stopped working.

So we bought an even less frilly GE three years ago. I had read that the company brought refrigerator manufacturing back to the US, to assure better quality control. To avoid an ice-maker breaking, I used ice-trays. The shelf-brackets and frames (cheap plastic) broke over time, and I rigged repairs. Then water began to collect in the unit's floor. I've done all the things that service experts recommend: clearing the drain tube, checking the cooling coils for ice buildup, tilting the unit so it's higher in front, as this helps with draining into the bottom of the unit, where water evaporates in a pan. I found the door seal torn, so I replaced that. No dice.

This sort of refrigerator is a simple machine. Anyone with basic skills can make basic repairs, as I found when I downloaded a parts diagram.

I was about to get a new evaporator coil for the freezer, an easy replacement for a DIYer and about $150, until I realized for for $1000 more (I have a good deal of a credit-balance on my Lowes account and sales are coming) we could get a low-end Bosch, build like a Panzerkampfwagen IV from World War II. It has an ice-maker. From that failure of a Maytag I learned how to replace or repair them. Irony? That's about what we paid for the failing GE, the Maytag floor model, and less than we shelled out for the original Samsung.

When I talked to folks in the business the consensus was "expect at least 10-15 years, maybe more) out of the Bosch brand." Only Subzero lasts longer, but we don't have $10K or more for a refrigerator. I shopped around for deals and found one at Lowes. As soon as the July 4 prices drop, I'll pull out my %5 off card, use up the credit on our account, and have a Bosch installed. And yes, we'll pony up for an extended warranty at the end of the first year, which we get for free.

Our 2012 basic-model Bosch dishwasher is going strong, but I'm planning for a whole-house water filter system to keep calcification from well water from clogging up our appliances that use water. Folks in the business advised I consider that, too.

Onward. I will never own a "smart appliance" beyond the home-security system I installed. I don't need a refrigerator to tell me when I need to buy milk. I just want something that may work into my 80s. That's right around the darned corner.

 Creative-Commons Image: https://www.publicdomainpictures.net/en/view-image.php?image=22055 

  

Thursday, April 30, 2026

Slowing Down To Do Better Work

Mowing time again

When my childhood friend Dominic made a heroic decision to try organic farming after a layoff, just a year after Nan and I moved to the country, I paid close attention. He stayed at it for the better part of a decade, using antique equipment. His experience taught me a few things that I have brought to my own gardening and tending rural land. 

Of all I learned, one lesson stands out most, a principle I call “slowing down to do better work.” I wish that Dom and I had read Wendell Berry’s essays sooner. Berry’s thinking about local culture, agrarianism, and the proper use of tools would have saved us time and money while adding pleasure and better stewardship of the land. The scale of Berry’s economic model maps well onto my personal belief that Distributism can replace corporate capitalism in a century that will see, thank goodness, declining human population.

First, though, some specifics before thinking big and long-term. Central Virginians, save during drought, must mow grass close to the house weekly all Spring, Summer, and most of the Fall. Fields get fewer mowings. Dominic noticed how the old-timers near him in Hanover County would mow their fields slowly with the throttles set high. This burns more fuel but means cleaner cuts when creeping over the fields at the pace of a slow walk. We have here the antithesis of “mow blow and go” suburban lawn “care,” nearly always farmed out to a company these days. I see the kids who do this on zero-turn mowers that race over a yard. I suppose the homeowners are too busy after work to tend the yard, off playing golf or chauffeuring the kids (who would be better off in a neighborhood pickup game) to kid-sports events.

Many suburban lawns are often a toxic nightmare, anyhow, so let’s move on to something sane. Most of us are not Berry with his horse-drawn equipment yet the same philosophy can guide our work. For the rural mower who aims to protect and improve the topsoil, the slow-speed, high-rpm method means that grass and weeds are cut cleanly, not torn by the blades (assuming the blades are sharp). Yes, it takes longer but when I gathered and stacked the hay, I found it clean and superior to what I had formerly done in haste. The hay goes to our garden or chicken run, where the birds scratch it around and eat the seeds.

Berry writes about this philosophy of farm work in his essay “Horse Drawn Tools and The Doctrine of Labor Saving.” He decided to forego the purchase of a used 8N Ford tractor and mow with a team of horses and an International horse-drawn mower. He found that his equipment made better hay than did his neighbors’ tractors. His story will perplex those farmers who consider even the 8N a bare-bones machine as outmoded as a horse and best seen in a museum. I can attest that my own 1952 8N is a bulletproof, simple machine that has needed nothing in the 20 years it has been in the family, beyond fluid changes, fuel, two tire tubes, some paint, and a few sets of spark plugs. I learned to plow and mow on the machine and it still does useful chores, including cutting where we gather hay to stack in our barn after it cures.

While I have no plans to farm with horses—we raise chickens, not row-crops—some of Berry’s ideas have influenced me deeply. We looked at expensive hay-baling gear for small square bales. For now, it saves us money to buy straw and store just enough hay that we can manage raking, tedding, and transporting manually; we might get a dry stack the size of an SUV in a good year and need 30 square bales of straw as well.

I contrast this to what our Deere dealer talks about: air-conditioned cabs, round bales so huge we would need hay spears and plastic wrappers to move and season them. No thanks. The last thing we want is more complexity and more unsustainable materials on the farm or going to the landfill. Speed breeds those things, and Berry rightly sees the debt-trap they set for a small farm. 

Some expenses are inevitable, of course. When Dominic was still farming, I encouraged him to find one reliable modern diesel tractor in place of his handful of sometimes unreliable gas-powered antiques. But even with new or nearly new equipment, a farmer should start small. A dealer often tries to sell “just in case” power and attachments. They can be added later. I did recently spend $500 to set our utility tractor and implements up with Deere’s iMatch hitch, so I can hook up the rotary mower in a minute, then drop it to get a different implement. As I age and have arthritis in my left hip, such accommodations have proven to be a godsend.

Yet I waited 14 years to upgrade the tractor, after 600 hours of service. We might all apply Berry’s philosophy that way. It works off the farm too. We are today using AI to enable us to do more work in a shorter span of time, but what gets lost in all that haste? How much poorly-conceived “good enough” work, like poorly-mowed fields, gets completed as a result? Berry states that instead of building good soil, hasty farmers impoverish the land. With generative AI and other purportedly labor-saving technology, what are we doing to improve our minds and spirits? What are we doing to make our clients’ lives and our work better?

The next time you are asked to hurry a job, reply that you want to do good work.

When drafting this post, I wrote it first by hand. Checking Duck Duck Go, I verified the location of an e-text of Berry’s collection of selected essays The World-Destroying Fire, then used that e-text to help me find and annotate passages in my paper copy. No contradiction here at all. Using the technologies of print and Internet together led me to work methodically and do better work. If you want to see what Berry advises, you can find the essays here.

I turned off the AI assistant too.

Sunday, March 22, 2026

Delayed Gratification and Wasted Money

Gambling machines in a convenience store

I hate gambling. I think it preys upon the poor and the impulsive. It reveals a deeper problem.

When I saw a young man in the convenience store putting dollar after dollar into the "skills game" machine, I tried not to wince. No, it's a gambling machine, not a skills machine. That would be the arcade games I played, for a few bucks in quarters, 40  years ago. 

This was not just a few minutes of harmless fun. He was playing to win, round after game. 

The House always wins, kid. You can read about the state legislature's latest bill on this subject, if you wish. 

I try to avoid the political here, but it saddens me to see what I regard as a urban problem flower out here, where lots of folks still work with their hands or work the land. 

The fellow punching buttons on the "skill game" was strong-looking, the sort I'd pay 20 bucks an hour in cash for manual labor, plus feed him lunch and give him gas money. My late father-in-law would have said "I'll find him work to do." I have 300' feet of fence to put in and last weekend, I was lucky to get a former neighbor to help me pound in 30 T-posts. Yet I cannot find folks I trust to pay to do that. One lad who came out--in shorts and tennis shoes--lasted one whole day and never returned. I'm three times his age and wore him out.

We are picky about who we invite onto our land. We don't trust day-laborers unless we know them already. It's a sad reality of a time when too many people lead precarious lives, make bad choices, and have substance-abuse issues. Trust must be earned, not assumed.

In any case, at the store I wanted to tell the young man "put 50 bucks down at Charles Schwab and get a share of Tractor Supply. In six or seven years it will be worth 100 dollars."

He'd think I came from Mars. His addiction to that one-armed bandit shows that he's not one to wait for returns. I may be too cruel. Perhaps he's living like so many Americans, from paycheck to paycheck.

That said, American life exists now in the age of instant gratification. It's changed the labor market since COVID.

My friends who run a local Chinese place are closing shop after this week; they can no longer find any help to provide table service and they are worn out. The husband runs the kitchen alone; the wife runs the bar and their daughter handles the take-out orders. Their son runs errands. I hear from lots of restaurant owners the same complaint: no one wants to work their hours at any hourly rate and it's hard to pay a living wage on restaurant margins.  I don't mind the mandatory service fees I'm seeing on checks now, either.

Of course more folks may soon be on the job market. Our server at a pub in Williamsburg, VA had a career as a graphic designer until AI replaced her; she's the second designer I've met who had to leave the field.

In such an economy, setting money aside to get us through old age is a tall order, especially in a culture that discouraged thrift. I sound like an old fart, but I feel that there's something to the idea that social media and what Sherry Turkle calls "always-on, always-on-you" technology have made us a nation of emulators, who want to party like influencers and live like high-rollers. We were already consumers. Now, in short, we want all that stuff and that lifestyle without waiting to earn it.

I prefer what we Lebanese-Americans refer to as our "side hustles." We make a bit of money here, a bit more there, and sock it away. If there's hope, and I think there is, it comes those like a recent student who, at 21 years old, puts $25 dollars away monthly in a mutual fund. She knows what it will be worth in 40 years. The son of the Chinese restaurant owners wants to become a mechanic. He knows it will pay well and provide a lifelong career, and he loves cars as much as I do.

I wish there were more like them. I would wager--yes, wager--that they'd let me hire them to hang fence on T-posts any day of the week, even if they lacked the stamina to pound those posts into the ground.

 That's reason to hope. As Spring unfolds here, and chores get done, I'll keep hoping for other changes on the wind.

Creative commons image courtesy of Pennlive. 

Tuesday, January 20, 2026

The Last X You Will Ever Buy

New DeWalt Circular Saw


Sobering, isn't it? At age 65, I confront a strangely comforting dilemma: Many of the thing I buy or do will outlive me. That Deodar Cedar in between us and the road? It will be big when I'm in my 80s, but if climate-change and future residents allow, it will still be growing bigger in the 22nd Century.

If my tree-planting is for the next generation, as well as an "up yours" to the greedy idiocy of denying human-driven climate change, then buying things that last a long time constitutes a statement about economics and frugality. 

Every time we acquire a vehicle, and I'm addicted to clean used vehicles, I say "this one will be here when I ain't." And now when a tool wears out, I start shopping for something that will be in my estate sale. I've written here about the wisdom of getting only vehicles that are friendly for DIY work. That philosophy applies to many things, big and small.

Last week, the first circular saw I'd every owned, a basic Skil purchased in the early 1990s for under $50, gave up the ghost. I could have ordered a new trigger (the motor works still) but stands far from my late father-in-law's Porter-Cable belt sander, a Gibraltar-like device that commands reverence and weighs about 40 pounds. I got a new trigger for that one. It should last another 40 years. The Skil is a cheap tool that lasted a long time because I am careful with my tools, cleaning them and never, ever loaning a tool or vehicle to anyone unless I use it for the borrower.

The saw's replacement is a DeWalt saw. Instead of an $80 Skil, I spent another $100 and got a saw that rips paneling like a hot knife though butter. The handle fits my big hands well, and the trigger design is sure and solid. These features matter after you work with a saw for a few hours.

I really like the DeWalt's corded tools, but I've sworn off the cordless ones because the company changes battery designs regularly and I had to find third-party batteries from China (when I can in these crazy times) to keep a set of 2008 tools running. 

Planned obsolescence violates every fiber of my being.There was a time when a good tool meant a lifetime investment; that's the case for the sander I noted, as well as some of the shop tools we own. My Bosch Miter-box and Delta table saws should survive me (I bought the latter from an estate, in fact). I attended a farm show where a craftsman used a spoke-shave from the middle of the 18th Century; George III was boss here when that tool was made. He told me it would go to a child with an interest in woodworking, as it has been passed down for over 250 years.

I just wonder: if we thought of purchasing as much as possible items that would outlast us, how much healing would that do for the environment? Moreover, how much would it rebuke the purveyors of cheaply made, disposable goods? We would have to save up for a quality item. Wendell Berry made that this sort of durability and longevity tests for a sustainable economy.

When the current stupid era ends with an inevitable economic crash, I wonder if we might return to the Distributist principles of localism, frugality, and durability.

I'll be cutting boards and waiting to see. 

 

Tuesday, October 28, 2025

A Simple Ceiling-Fan Hack


Admitting something obvious, something you did not know before, should be counted as wisdom. Let's hope. I just learned a means of using our ceiling fans to best circulate warm air through our home, in wood-stove season.

In Winter, set the fan to rotate clockwise, which pushes hot air trapped near the ceiling down and draws air near the floor upward. In summer, set the fan counterclockwise, to push air down and give you that lovely fanning effect. Run your fans low, and yes, even if you have central heat and air, running them will reduce your bills.

Of course, mine were set backward, by me.  How to change the direction? Find a small button on the fan housing; you'll need a ladder. Some newer fans with remotes likely have that feature, but I'm averse to anything that I must use a remote control to master.

Hack that fan and stay warm. It's my favorite time of year. 

Silly question: same trick south of the equator? Sure. 

image credit: pexels.com 

Buying a Vintage Tractor for Farming? Features & Safety

    Author's note: this piece ran in edited form and under a different title at Hemmings Daily. I post it here in original form to shar...